Materials, Cutting tools & Sundries

To assist the model-maker and model engineer, we stock a range of materials and tools. The range is being added to regularly, and we welcome enquiries regarding products which may not yet be listed.

METALS

Nickel Silver 

 NOTE  There has recently been a dramatic increase in the cost of imported nickel-silver, and the prices listed below reflect this.  The price increase is effective from 15 August 2008.

SHEET This is FLAT, ie not from a coil. Grade is NS103 - 10% half-hard. Sheets can be cut in half lengthwise or crosswise to facilitate postage. Half-sheets available singly, price pro-rata plus 50p.

NSS010 Nickel-silver sheet, 24 x 12 x .010in (610 x 305 x 0,25mm.)
£10.50
NSS015 Nickel-silver sheet, 24 x 12 x .015in (610 x 305 x 0,4mm.)
£14.75
NSS019 Nickel-silver sheet, 24 x 12 x .019in. (610 x 305 x 0,5mm.)
£17.00
NSS022 Nickel-silver sheet, 24 x 12 x .022in. (610 x 305 x 0,6mm.)
£19.50
NSS028 Nickel-silver sheet, 24 x 12 x .028in. (610 x 305 x 0,7mm.)
£23.50
NSS036 Nickel-silver sheet, 24 x 12 x .036in. (610 x 305 x 0,9mm)
£29.75
NSS048 Nickel-silver sheet, 24 x 12 x .048in. (610 x 305 x 1,2mm)
£39.95
NSS064 Nickel-silver sheet, 24 x 12 x .064in. (610 x 305 x 1,6mm)
£51.00
NSS079 Nickel-silver sheet, 600 x 300 x 2,0mm. (Sawn edges)           See note 1 below £122.00
NSS118 Nickel-silver sheet, 600 x 300 x 3,0mm  (Sawn edges)           See note 1 below £182.00

Note 1.  2mm and 3mm nickel silver sheet can be supplied in multiples of 25mm widths, cut from these 300mm wide sheets (i.e. 300 x 25, 300 x 50, 300 x 75 etc.)

Prices, including cutting,as follows:           2mm  - £7.50 per 25mm           3mm - £9.50 per 25mm

CHEQUERPLATE
NSC7 Nickel-silver chequerplate, 0 scale.          6 pieces, each 6ft. x 4ft.3in. scale   £5.00
NSC10 Nickel-silver chequerplate, gauge 1 (3/8 or 10mm)       6 pieces, as above
£10.00
WIRE            METRIC
NSW7 Nickel-silver wire, 0.7mm. dia. x 1 metre **
£0.50
NSW10

Nickel-silver wire, 1.0mm. dia. x 1 metre **

** These wires are specially drawn in STRAIGHT metre lengths. Unless it would cause a problem, we prefer to cut the lengths in half to facilitate postage.

Minimum order 5 metres please.

£0.60

 

NSW12 Nickel-silver wire, 1.2mm dia.  ++                                                 Per metre
£0.60
  ++ This wire is from a continuous coil. Also available in GILDING METAL, at the same price  
FLAT BAR & STRIP     IMPERIAL
NS250/062 Nickel-silver bar, 1/4 x 1/16 x 24in.      (Drawn, square edges) £3.00
NS250/125 Nickel-silver bar, 1/4 x 1/8 x 24in.         (Drawn, square edges) £6.00
NS1/062 Nickel-silver strip, 1 x 1/16 x 24in.        (Ex-sheet, sheared edges) £8.50
NS15/062 Nickel-silver strip, 1 1/2 x 1/16 x 24in. (Ex-sheet, sheared edges) £12.50
NS2/062 Nickel-silver strip, 2 x 1/16 x 24in.        (Ex. sheet, sheared edges) £16.00
NS1/125 Nickel-silver bar, 1 x 1/8 x 12in.            (Ex. sheet, sawn edges) £9.50

SQUARE BAR       IMPERIAL

NS125/125 Nickel-silver bar, 1/8 x 1/8 x 24in. (3.2 x 3.2 x 610mm) £3.50
NS188/188 Nickel-silver bar, 3/16 x 3/16 x 24in. (4.7 x 4.7 x 610mm) £5.00
ROUND BAR      IMPERIAL, except *
NS079 Nickel-silver round bar, 2mm dia. x 12in. (305mm)     * £0.70
NS094 Nickel-silver round bar, 3/32in. dia. x 12in. (2.38mm dia. x 305mm) £0.80
NS125 Nickel-silver round bar, 1/8in. dia. x 12in.  (3.2mm dia.x 305mm) £1.00
NS188 Nickel-silver round bar, 3/16in. dia. x 12in. (4.7mm dia. x 305mm) £1.50
NS250 Nickel-silver round bar, 1/4in. dia. x 12in. (6.35mm dia. x 305mm) £2.00
NS312 Nickel-silver round bar, 5/16in. dia x 12in. (8.0mm dia x 305mm) £5.20
NS375 Nickel-silver round bar, 3/8in. dia x 12in. (9.5mm dia x 305mm) £7.80
NS437 Nickel-silver round bar, 7/16in. dia. x  12in. (11.1mm dia. x 305mm)* £13.25
NS500 Nickel-silver round bar, 1/2in. dia. x 12in. (12.7mm dia. x 305mm)  * £13.60
NS562 Nickel-silver round bar, 9/16in. dia. x 12in. (14,27mm dia. x 305mm) * £15.50
NS625 Nickel-silver round bar, 5/8in. dia. x 12in.  (16mm dia. x 305mm)  * £17.60
NS750 Nickel-silver round bar, 3/4in. dia. x 12in.  (19.1mm dia.x 305mm)  * £27.25
NS812 Nickel-silver round bar, 13/16in. dia. x 12in. (20.62mm dia. x 305mm) * £30.70
NS1000 Nickel-silver round bar, 1in. dia. x  12in.  (25.4mm dia. x 305mm)  * £39.90
NS1500 Nickel-silver round bar, 1 1/2in. dia. x 12in. (38.1mm dia. x 305mm) * £72.00
  * Available in 6in. (152mm) length, priced pro-rata.  

 

Brass

SHEET This is both ex.-coil, or FLAT, ie not from a coil. (Depends on thickness)  Sheets can be cut in half lengthwise or crosswise to facilitate postage. Half-sheets available singly, price pro-rata plus 50p.

BS010 Brass sheet, 24in. x 12in. x .010in. (600 x 300 x 0,25mm.)  Ex. coil
£9.00
BS015 Brass sheet, 24in. x 12in. x .015in. (600 x 300 x 0,4mm.)   Ex. coil
£11.50
BS020 Brass sheet, 24in. x 12in. x .020in. (600 x 300 x 0,5mm.)  Ex. coil
£14.50
BS028 Brass sheet, 24in. x 12in. x .028in. (600 x 300 x 0,7mm.)            Temporarily unavailable
£18.00
BS036 Brass sheet, 24in. x 12in. x .036in. (600 x 300 x 0,9mm.) 
£24.00
BS048 Brass sheet, 24in. x 12in. x .048in. (600 x 300 x 1,2mm.)
£31.00
BS064 Brass sheet, 24in. x 12in. x .064in. (600 x 300 x 1,6mm.) 
£41.00
BS079 Brass sheet, 24in. x 12in. x .079in. (600 x 300 x 2,0mm.)

£51.00

MILLED ANGLE (not folded, hence sharp corners)       METRIC             500mm lengths
MBA11 Milled brass angle, 1mm x 1mm x 0,25mm wall thickness.  
£1.75
MBA21 Milled brass angle, 2mm x 1mm x 0,4mm wall thckness     
£2.15
MBA22 Milled brass angle, 2mm x 2mm x 0,4mm wall thickness    
£2.20
MBA31 Milled brass angle, 3mm x 1mm x 0,4mm wall thickness    
£2.40
MBA315 Milled brass angle, 3mm x 1,5mm x 0,4mm wall thickness
£2.40
MBA32 Milled brass angle, 3mm x 2mm x 0,5mm wall thickness    
£2.40
MBA33 Milled brass angle, 3mm x 3mm x 0,45mm wall thickness  
£2.40
MBA42 Milled brass angle, 4mm x 2mm x 0,5mm wall thickness    
£2.50
MBA43 Milled brass angle, 4mm x 3mm x 0,5mm wall thickness    
£2.70
MBA52 Milled brass angle, 5mm x 2mm x 0,5mm wall thickness
£3.15
MBA53 Milled brass angle, 5mm x 3mm x 0,6mm wall thickness    
£3.25
MBA55 Milled brass angle, 5mm x 5mm x 0,6mm wall thickness    
£4.25
MBA63 Milled brass angle, 6mm x 3mm x 0,6mm wall thickness    
£3.90
MBA106 Milled brass angle, 10mm x 6mm x 1,0mm wall thickness *
£4.45
  * Also available in 1 metre length, priced pro-rata. (Use suffix M after code.)  
DRAWN ANGLE            IMPERIAL                           24in. lengths                     **NEW**
DBA250/250 1/4in. x 1/4in. x 1/16in.
£3.50
DBA500/500 1/2in. x 1/2in. x1/16in.
£5.75
DBA750/750

3/4in. x 3/4in. x 1/16in.

£8.75
MILLED CHANNEL              METRIC                                 500mm lengths
MBC21 Milled brass channel, 2mm x 1mm x 0,4mm wall thickness   
£2.20
MBC215 Milled brass channel, 2mm x 1,5mm x 0,4mm wall thickness
£2.20
MBC22 Milled brass channel, 2mm x 2mm x 0,4mm wall thickness
£2.20
MBC32 Milled brass channel, 3mm x 2mm x 0,5mm wall thickness
£2.50
MBC33 Milled brass channel, 3mm x 3mm x x 0,45mm wall thickness
£2.50
MBC62 Milled brass channel, 6mm x 2mm x 0,6mm wall thickness.  *
£3.50
MBC63 Milled brass channel, 6mm x 3mm x 0,6mm wall thickness.  *
£4.00
MBC64 Milled brass channel, 6mm x 4mm x 0,6mm wall thickness.  *
£4.10
MBC83 Milled brass channel, 8mm x 3mm x 1,0mm wall thickness  x   1metre
£8.80
MBC104 Milled brass channel, 10mm x 4mm x 1,0mm wall thickness  x 1 metre
£17.00
  *  Also available in 1 metre length, priced pro rata. (Use suffix M after code.)  
MILLED T SECTION         METRIC                   500mm lengths
MBT15/15 Milled brass T section, 1.5mm  x 1.5mm x 0,3mm wall thickness £2.30
MBT3/3 Milled brass T section, 3mm  x   3mm  x  0,45mm wall thickness £2.75

MILLED T SECTION FLANGE       METRIC           500mm lengths

(The vertical web is slotted, 0.5mm wide to accept a flat strip, thus two T sections and a suitable height central section can be assembled to form a plate girder, for structural model-making )

MBF63 Milled brass flange, 6mm x 3mm x 0,5mm wall thickness. £4.80
MILLED   I  BEAM  SECTION    METRIC            500mm lengths
MBH63 Milled brass I section, 6mm x 3mm x 0,6mm wall thickness
£4.50
SQUARE SECTION      IMPERIAL, except #
B040/040 Brass square, 1mm x 1mm x 500mm.            #
£0.80
B125/125 Brass square,  1/8 x 1/8 x 24in. (3,2 x 3,2 x 610mm)
£1.75
B156/156 Brass square, 5/32 x 5/32 x 24in. (4 x 4 x 610mm)
£2.30
B188/188 Brass square, 3/16 x 3/16 x 24in. (4,7 x 4,7 x 610mm)
£2.65
B250/250 Brass square, 1/4 x 1/4 x 24in. (6,35 x 6,35 x 610mm)
£4.40
B312/312 Brass square, 5/16 x 5/16 x 24in. (8 x 8 x 610mm) **
£6.00
B375/375 Brass square, 3/8 x 3/8 x 24in. (9,5 x 9,5 x 610mm) **
£8.00
B500/500 Brass square, 1/2 x 1/2 x 24in. (12,7 x 12,7 x 610mm) **
£14.00
  ** Also available in 12in. (305mm) lengths. Price pro-rata. (No cutting charge)  
FLAT & RECTANGULAR SECTION     IMPERIAL
B1000/062
Brass flat, 1in. x 1/16 x 24in. (25,4 x 1,6 x 610mm)
£4.75
B1250/062
Brass flat, 1 1/4in. x 1/16. x 24in.  (32 x 1,6 x 610mm)
£5.90
B1500/062 Brass flat, 1 1/2in. x 1/16 x 24in. (38 x 1,6 x 610mm)
£7.00
B250/125 Brass flat, 1/4 x 1/8 x 24in. (6,35 x 3,2 x 610mm)
£2.80
B375/125 Brass flat, 3/8 x 1/8 x 24in. (9,5 x 3,2 x 610mm)
£3.75
B500/125 Brass flat, 1/2 x 1/8 x 24in. (12,7 x 3,2 x 610mm)
£4.50
B750/125 Brass flat, 3/4 x 1/8 x 24in. (19,1 x 3,2 x 610mm)
£6.50
B1000/125 Brass flat, 1in. x 1/8. x 24in. (25.4 x 3.2 x 610mm) *
£8.50
B2000/125 Brass flat, 2in x 1/8 x 24in. (50,8 x 3,2 x 610mm) * £17.00
B500/250 Brass bar, 1/2 x 1/4 x 24in. £8.00
B750/375 Brass bar, 3/4 x 3/8 x 24in. £15.00
  * Also available in 12in. (305mm) lengths. Price pro-rata. (No cutting charge)  
FLAT SECTION     METRIC           *NEW*
BF151 Brass flat, 1,5mm x 1mm x 500mm £1.20
BF21 Brass flat, 2mm x 1mm x 500mm £1.25
BF251 Brass flat, 2,5mm x 1mm x 500mm £1.40
BF31 Brass flat, 3mm x 1mm x 500mm £1.50
ROUND ROD
B125 Brass round, 1/8in. dia. x 24in.  (3,2 dia. x 610mm)
£1.20
B188 Brass round,3/16in. dia. x 24in.  (4,7 dia. x 610mm)
£2.20
B250 Brass round, 1/4in. dia. x 24in.  (6,35 dia. x 610mm)
£2.50
B312 Brass round, 5/16in. dia. x 24in.  (8,0 dia. x 610mm)
£3.25
B375 Brass round, 3/8in. dia. x 24in.  (9,5 dia. x 610mm)
£7.00
B500 Brass round, 1/2in. dia. x 24in.  (12,7 dia. x 610mm)
£10.50
B625 Brass round, 5/8in. dia. x 24in.  (16,0 dia. x 610mm) *
£16.00
B750 Brass round, 3/4in. dia. x 24in.  (19,1 dia. x 610mm) *
£23.00
B1000 Brass round, 1in. dia. x 24in.  (25,4 dia. x 610mm) *
£38.00
B1250 Brass round, 1 1/4in. dia. x 24in.  (32,0 dia. x 610mm) *
£40.00
  * Also available in 12in. (305mm) lengths. Price pro-rata. (No cutting charge)  
TUBE (each size telescopes within the next)        METRIC
BT3 Brass tube, 3mm o/d x 0,45mm wall thickness x 1 metre
£2.50
BT4 Brass tube, 4mm o/d x 0,5mm wall thickness x 1 metre
£3.15
BT5 Brass tube, 5mm o/d x 0,5mm wall thickness x 1 metre
£3.90
 
TUBE (each size telescopes within the next)        IMPERIAL
 
BT062 Brass tube, 1/16 o/d x 12in..
£1.25
BT093 Brass tube, 3/32 o/d x 12in.
£1.35
BT125 Brass tube, 1/8 o/d x 12in..
£1.65
BT156 Brass tube, 5/32 o/d x 12in.
£1.75
BT188 Brass tube, 3/16 o/d x 12in.
£2.00
BT218 Brass tube, 7/32 o/d x 12in.
£2.10
BT250 Brass tube, 1/4 o/d x 12in.
£2.20
BT281 Brass tube, 9/32 o/d x 12in.
£2.70
BT312 Brass tube, 5/16 o/d x 12in.
£3.10
BT375 Brass tube, 3/8 o/d x 12in.
£3.50
BT437 Brass tube, 7/16 o/d x 12in.
£4.20
BT500 Brass tube, 1/2 o/d x 12in.
£4.75
BT562 Brass tube, 9/16 o/d x 12in.
£5.60
BT625 Brass tube, 5/8 o/d x 12in.
£6.00

Copper

SHEET         Sheet sizes 24in. x 12in. (610 x 305mm)  These may be cut cross-wise or length-wise to facilitate posting. Half sheets available priced pro-rata plus 50p.
Code
s.w.g.
   
CUS018
26
Copper sheet, 24 x 12 x .018in. (0,45mm)
£19.50
CUS022
24
Copper sheet, 24 x 12 x .022in. (0,55mm)
£20.60
CUS028
22

Copper sheet, 24 x 12 x .028in. (0,7mm)

£25.40
CUS036
20
Copper sheet, 24 x 12 x .036in. (0,9mm)
£29.00
CUS048
18
Copper sheet, 24 x 12 x .048in. (1,2mm)
£41.50
CUS064
16
Copper sheet, 24 x 12 x .064in. (1,6mm)
£51.00
CUS080
14
Copper sheet, 24 x 12 x .080in. (2,0mm)
£64.00
CUS100
-
Copper sheet, 24 x 12 x .100in. (2,5mm)
£83.50
CUS118
-
Copper sheet, 24 x 12 x .118in. (3,0mm)
£96.50

 

  TUBE     In STRAIGHT 24in. lengths.
CUT062  Copper tube, 1/16in. (1,6mm) o/d
£3.50
CUT093  Copper tube, 3/32in. (2,4mm) o/d
£4.40

Phosphor-bronze

PBS

1.25 x 0.25mm, ideal for loco pick-ups, boiler bands, tender and coach beading, coach roof strips etc.                                          

Per metre 

£0.75

 

Silver Steel (Precision ground, Imperial Sizes in 13in. (330mm) lengths.)

SS094 3/32 in. dia.
£0.80
SS156 5/32in dia. (gauge 0, bogie and tender axles)
£1.30
SS188 3/16in dia. (gauge 0, driving axles)
£1.30
SS250 1/4in dia. (gauge 1, driving axle)
£2.00
SS312 5/16in dia.
£3.00

Stainless Steel (Imperial & metric sizes in 24in. (610mm) lengths.)        **NEW**

STS3 3mm. diameter x 24in. £2.50
STS5 5mm. diameter x 24in. £3.25
STS250 1/4in. diameter x 24in. £4.50
STS8 8mm. diameter x 24in. £6.50
STS375 3/8in. diameter x 24in. £7.90
STS20 20mm diameter x 6in. (Only available in this length) £6.00
STF010 2in. wide x 15in. long x .010in flat strip. (Only available in this length) £0.50

Corrugated Steel Sheet

  This is listed in the Model Railways Supplies section  

Low-melt Solder

Suitable for white-metal kits etc. CONTAINS LEAD

       NOTE        With effect from  1st July 2006, the supply of lead-based solders for use in industry

has ceased, and its use in industry will be forbidden under new European Health & Safety Regulations.  Private users will be un-affected, and may continue to use stocks of lead-based solder, provided that the models etc. on which they are used are not sold subsequently for commercial gain.  We shall continue to supply lead-based solder for as long as manufacturers continue production, but it is likely that production will be seriously reduced.   Your attention is drawn to the Health & Safety information printed on the product packaging.

LMS70 70 degree C in stick form.                 Approx. weight 50gm.    TEMP UNAVAIL
£2.50
LMS70A 70 degree C in stick form.                 Approx. weight 250gm.  TEMP UNAVAIL
£11.50
LMS145W

145 degree C in wire form,           1,6mm. dia. x 1 metre length

                                                              Approx. weight 20gm.

£1.50 coil
LMS145S

145 degree C in flat ribbon form,   2,5mm wide x 0,5mm x 2mtrs.

                                                              Approx. weight 20gm.

£1.50 coil

 

PLASTICS & LAMINATES

Plastic Modelling Card

HIGH IMPACT POLYSTYRENE (H.I.P.) sheet, with a white satin finish.  Can be cut easily with a craft knife, and can also be rolled, folded and rivetted using our range of metalforming tools. 

NO SPECIAL SOLVENTS REQUIRED.   Can be joined using ordinary cellulose paint thinners.

HIP5A HIP sheet, 330 x 220 x 0,5mm.
£0.50
HIP5B HIP sheet, 440 x 330 x 0,5mm.
£1.00
HIP5C HIP sheet, 660 x 440 x 0,5mm.
£2.00
HIP10A HIP sheet, 330 x 220 x 1,0mm.
£1.00
HIP10B HIP sheet, 440 x 330 x 1,0mm.
£2.00
HIP10C HIP sheet, 660 x 440 x 1,0mm.
£4.00
HIP15A HIP sheet, 330 x 220 x 1,5mm.
£1.50
HIP15B HIP sheet, 440 x 330 x 1,5mm.
£3.00
HIP15C HIP sheet, 660 x 440 x 1,5mm.
£6.00
HIP20A HIP sheet, 330 x 220 x 2,0mm.
£2.00
HIP20B HIP sheet, 440 x 330 x 2,0mm.
£4.00
HIP20C HIP sheet, 660 x 440 x 2,0mm.
£8.00

 

TufnolTM  Rod

Rigid rod, having excellent electrical insulating properties. Can be machined, drilled and tapped. CAN BE SUPPLIED IN METRE LENGTHS, IF REQUIRED. PRICE PRO-RATA

TR6
6,0mm dia. x 292mm long (11,5in.)
£3.00
TR8
8,0mm dia. x 292mm long (11,5in.)
£3.50

TR10

10,0mm dia. x 292 mm long (11,5in.)
£3.90
TR12
12,0mm dia. x 292mm long (11,5in.)
£6.00
TR16
16,0mm dia. x 292mm long (11,5in.)
£8.50
TR20
20,0mm dia. x 292mm long (11,5in)
£10.00
TR25
25,0mm dia. x 292mm long (11,5in.)
£14.50

 

PAINT PRODUCTS

We are the UK imports of the famous range of  Floquil Paints and varnishes.  These are the original solvent-based products.  Available in one fl. oz. jars.  Please ask for list of available colours and details of special shipping arrangements.             View list of colours

 

MILLING CUTTERS

2 bladed milling cutters (slot drills). High Speed Steel.

METRIC SIZES   IMPERIAL SIZES  
SD2 2.0mm. 6mm. dia. shank £6.00 SD062
1/16
1/4in. dia. shank £6.00
SD3 3.0mm. 6mm. dia. shank £6.00 SD125
1/8
1/4in. dia. shank £6.00
SD4 4.0mm. 6mm. dia. shank £6.00 SD188
3/16
1/4in. dia. shank £6.00
SD5 5.0mm. 6mm. dia. shank £6.00 SD250
1/4
1/4in. dia. shank £6.00
SD6 6.0mm. 6mm. dia. shank £6.00 SD312
5/16
3/8in. dia. shank £6.00
SD8 8.0mm. 10mm dia shank £7.00 SD375
3/8
3/8in. dia. shank £7.00
SD10 10.0mm. 10mm dia shank £8.00 SD500
1/2
1/2in. dia. shank £8.00

B.A. TAPS

Size Taper Second Bottom Price (each) Price (set of 3)
6BA
T6BA
S6BA
B6BA
£3.50
£10.00
8BA
T8BA
S8BA
B8BA
£4.00
£11.00
10BA
T10BA
S10BA
B10BA
£5.00
£14.00
12BA
T12BA
S12BA
B12BA
£5.50
£15.50

METRIC TAPS& DIES (as used on ASTER locos)

Size
Taper
Second
Bottom
Price (each)
Price (set of 3)

DIE

(each)

M2 x 0,4
MFT2/4T
MFT2/4S
MFT2/4B
£3.50
£10.00
£8.50
M2,3 x 0,4
MFT23/4T
MFT23/4S
MFT23/4B
£4.00
£11.00
£8.50
M2,6 x 0,45
MFT26/45T
MFT26/45S
MFT26/45B
£4.00
£11.00
£11.50
M3 x 0,5
MFT3/5T
MFT3/5S
MFT3/5B
£3.50
£10.00
£9.50
M4 x 0,5
MFT4/5T
MFT4/5S
MFT4/5B
£3.50
£10.00
£9.50
M5 x 0,5
MFT5/5T
MFT5/5S
MFT5/5B
£3.50
£10.00
£9.50
M6 x 0,75
MFT6/75T
MFT6/75S
MFT6/75B
£3.50
£10.00
£9.50
M7 x 0,75
MFT7/75T
MFT7/75S
MFT7/75B
£5.50
£15.00
£9.50
M9 x 0,75
MFT9/75T
MFT9/75S
MFT9/75B
£5.50
£15.00
£10.00
M10 x 1,0
MFT10/1T
MFT10/1S
MFT10/1B
£5.50
£15.00
£12.00
Other sizes available upon request.

MISCELLANEOUS, MODEL ENGINEERING etc.

Wire Bending Jig

For accurate, repetitive bending of wire up to 1mm diameter.                       See picture and price

Needle files ("Swiss" files)

10 styles, including flat, square, triangular, rat-tail, etc.                                            Each.         £1.00

10 assorted                                                                                                                                           £9.00

Precision Engineer's Squares

PES3 3in. (75mm.)
£6.00
PES4 4in. (100mm.)
£7.00

PES6

6in. (150mm.)
£9.00
PESS Set of 3
£20.00

 

Machine Tools For Sale

MYFORD - RODNEY MILLING MACHINE

Table size 15in, x 4.25in. (380 x 106mm); travel 10in. x 4.5in. (250 x 112mm)

Has lever quill, also fine feed. Complete with machine vice, collets etc.

On steel cabinet stand, having 18in. x 18in. (450 x 450mm) footprint.

250v ac single phase.

An ideal machine for the Model Engineer, it has recently been restored in our workshop. New machine vice included.

Price £500.00 (inc. VAT)

Carriage can be arranged (UK mainland)

KRESS FM6955 DRILL / GRINDER / ROUTER

BRAND NEW 250v ac  550 watt  28,000rpm

Has standard 43mm dia. neck and fitted with 8mm collet.

Price £50.00 (inc. VAT)

 

 

AWAITING PHOTO

MYFORD SUPER 7 LATHE

Complete with 2 x 3-jaw chucks, 4-jaw independent chuck, tailstock chuck, 7in. faceplate, catch-plate, vertical milling slide, vice, change-wheels.

Single phase, with reverser switch.

Price £1400.00 (inc. VAT)

Carriage can be arranged (UK mainland)

Home | About us | Metalforming tools | Model railway products | Sundries | How to order | Contact us | Links
 
© Copyright MetalSmith Ltd 2004 designed by 1PCS.co.uk