SCENIC
PRODUCTS
The
photograph shows the realistic effect which can be obtained
by using corrugated steel sheet of scale size and thickness.
The guy on the left is painting the original fence whilst
his colleague is installing new panels. The rusty shed
was built entirely from corrugated sheets and soldered
together, using an acid flux. Soon afterwards, it was
noticed that rust was beginning to appear on the sheets
(an effect of the evaporation of the flux). Some hours
later, the shed had rusted completely, with a most pleasing
effect. On this gauge 0 diorama the "new"
sheets were given a coat of clear varnish to preserve
their shiny finish.
| CSS7 |
7mm
/ 1:48 / 0 scale. Pack consists of 10 sheets,
scale 8ft. x 2ft. 6in (2,4 x ,76m) and 5 sheets,
scale 6ft x 2ft 6in (1,8 x ,76m) Actual
thickness .002in (0,05mm)
Per pack
TEMPORARILY
OUT OF STOCK
|
£7.50 |
|
HANDRAIL STANCHIONS |
| AWAITING
PHOTOS |
Handrail stanchions, precision turned in brass.
Scale height 3ft. (0,9m), drilled for either one
or two
handrails. (For suitable wire, click here.)
Single-rail version Ideal for walkways on turntables
and
signals, whilst the double-rail version would
be used on
bridges and for general lineside railings.
Each type has an extended spigot which can be
inserted
into a pre-drilled hole, and secured by gluing
or soldering.
|
| HS7/1A |
Handrail stanchions, single
hole. Takes wire up to 1,0mm dia.
(pack of 20) |
£6.50 |
HS7/2 |
Handrail stanchions, double hole. Takes
wire up to 0,7mm dia.
(pack of 20) |
£6.75 |
HS7/2A |
Handrail stanchions, double hole. Takes
wire up to 1,0mm dia.
(pack of 20) |
£6.75 |
|
