NOTCHING
TOOL*
A very useful
tool for cutting out irregular shapes, or producing
large holes (round or rectangular) in sheet metal. Will
handle mild steel, brass, nickel-silver, aluminium,
plastics, up to 1,2mm (.048in.) thick. Especially useful
for cutting out window apertures etc.
| NT |
Width
of cut 6mm (.236in.), depth of cut 1,6mm (.064in.).
For apertures, it is first necessary to drill
a hole of 11mm. (.440in.) dia.
Shipped
weight 300g. |
£29.50 |
* manufactured
in U.S.A.
The
picture below shows the tool in use, notching the edge
of a brass sheet. To cut a rectangular aperture (e.g.
window) it is necessary to first drill a hole, through
which the notcher blade is inserted. It is then a simple
matter to work towards each corner to produce the required
shape.
|
